Turbohand - ergonomic and efficient hand ascender
Turbohand is perhaps the most effective, durable and ergonomic hand ascender on the market. It is perfect for those who work extensively with ropes, are arborists, work in rope rescue or other rigging activities. On the frame on the underside of the locking cam, a small pulley is mounted to guide the rope and reduce friction. The result is a longer product lifespan and significantly less friction while climbing. On angled ropes, this pulley guides the rope to protect it from a potentially worn sharp edge on the frame.
The rubberized handle extends all the way up and provides a good grip for both hands on a single ascender. The handle is also on exactly the same plane as the rope, which gives you more stability and thus efficiency.
The three attachment holes give you all the options you could wish for. The body itself is made of 3.5mm aluminum alloy. The locking cam is made of stainless steel and is designed to wear less on the rope. It also has drainage holes that prevent the buildup of ice, sand and mud.
The opening system is protected from both sides to prevent accidental opening during use. Nevertheless, it is easy to open and close the lock with one hand. The cam/locking system is also protected as the frame encloses the locking system itself.
The pulley that guides the rope during ascent can also be used for hoisting. Simply hang the hand ascender upside down, feed in the rope, guide the rope over the pulley wheel and pull. We recommend that a maximum of 50kg is lifted with this system, and it is not designed as a primary hoisting system for heavy loads.
The stainless guide, Turbohand Guide, is attached to the bottom of the hand ascender to guide the rope better during long ascents. Only Turbohand Pro has this mounted, but it can also be purchased separately.
- 3 attachment holes, two at the bottom and one at the top
- Ergonomic handle designed for one- and two-handed use
- Pulley wheel that guides the rope and reduces friction
- Anti-wear treated cam with drainage holes reduces wear on the rope
- EN 12841/B for 10 to 13 mm rope
- EN 567 for 8 to 13 mm rope